Home » Blog » Tips For Troubleshooting Typical Water Heater Issues

Tips For Troubleshooting Typical Water Heater Issues

water heater service

Are you experiencing problems with your water heater?

Water heater repair can be tricky and time-consuming, but the good news is that there are several ways to troubleshoot common water heater issues without having to call in a professional.

It is good to have some practical knowledge of how common problems can be handled to provide an immediate solution to unexpected water heater problems.

This post discusses 5 tips for troubleshooting typical water heater issues to help you get your hot water back on in no time.

Common causes of water heater problems

Water heaters are essential parts of our home plumbing system. Over time, these systems can suffer from wear and tear and require water heater repairs.

Some common causes of water heater failure include a faulty thermostat, clogged filters, blocked pilot light, corroded gas valve, damaged anode rod, or a malfunctioning temperature and pressure relief valve.

The best way to prevent costly repairs is to keep up with regular maintenance.

It is important to have your water heater inspected regularly by a qualified technician who can detect any signs of issues before they become serious.

If you’re looking for reliable water heater repair in Santa Ana, CA, make sure to contact an experienced and certified professional for the best results.

Why is it important to know some water heater troubleshooting tips?

Knowing some water heater troubleshooting tips is important for several reasons:

Cost savings

By knowing how to troubleshoot common problems with your water heater, you can avoid unnecessary service calls and repair costs.


Being able to identify and fix issues with your water heater quickly can help you avoid long periods without hot water.


A malfunctioning water heater can be dangerous, potentially leading to fires or carbon monoxide poisoning.

Knowing how to troubleshoot your water heater can help you identify potential safety issues and take appropriate action.

Prolonged life of your water heater

Regularly troubleshooting your water heater can help you identify and address small issues before they become bigger problems.

This can extend the life of your water heater and help you avoid the expense of a premature replacement.

Environmental impact

Conserving energy by troubleshooting and maintaining your water heater can help reduce your carbon footprint and protect the environment.

Overall, knowing how to troubleshoot your water heater is an important part of home maintenance and can save you money, time, and stress in the long run.

Check the thermostat

Water heater repair in Santa Ana CA often starts with checking the thermostat.

This is an important first step for troubleshooting typical water heater issues. If the thermostat is set too low, it will not be able to reach the desired temperature.

This can cause water to remain cold or only lukewarm.

1. Check the thermostat by turning the power off and removing the access panel.

2. Take a look at the thermostat and make sure it is set to the right temperature.

If it needs adjusting, carefully adjust the dial and reinstall the access panel before turning on the power.

3. Make sure the thermostat is turned on and set to the correct mode (heat or cool) and temperature. If the thermostat has a low battery indicator, replace the batteries.

4. Check thermostat wiring connections to ensure correct signals to HVAC systems.

Check The Pilot Light

One of the most common issues with water heaters is the pilot light going out.

If the pilot light goes out, it can cause your water heater to stop working altogether.

To troubleshoot this issue, follow these steps:

1. Find the pilot light assembly. This is typically located at the bottom of the water heater and is usually behind a small access panel.

2. Turn off the gas supply to the water heater. You can do this by turning the gas shut-off valve to the “off” position.

3. Wait a few minutes for any gas to dissipate before attempting to relight the pilot light

4. Remove the access panel to access the pilot light assembly.

A faulty thermocouple or gas valve can be a sign of faulty pilot light, so it is important to call a professional technician to replace it.

Check The Gas Valve

Gas water heaters use a gas valve to control the flow of gas to the burner.

The gas valve has several ports and is usually located on the side or near the bottom of the tank.

If your water heater isn’t heating up, it could be due to a malfunctioning gas valve.

1. Locate the gas valve: The gas valve is typically located on the outside of the water heater.

2. Look for a knob or lever that can be turned or flipped.

3. Turn off the gas supply: Before checking the gas valve, make sure to turn off the gas supply to the water heater.

This will prevent any potential gas leaks or other hazards.

4. Check the position of the gas valve: Once you’ve located the gas valve, check to make sure it’s in the “on” position. If it’s in the “off” position, turn it to the “on” position.

5. Inspect the gas valve for damage: Take a look at the gas valve and check for any damage, such as cracks or leaks.

If you notice any damage, it’s best to call a professional plumber in Santa Ana to handle the repairs.

Check The Anode Rod

An anode rod is designed to attract corrosive elements to protect the tank from rust and other damage.

Turn off the power supply or gas supply to the water heater, depending on the type of heater you have.

Anode rods are designed to attract corrosive elements to protect the tank from rust and other damage.

To remove them, turn off the power supply or gas supply, use a socket wrench, and take a close look at the rod to see if it is corroded or coated.

If it is, replace it with the correct part.

If you do need to replace the anode rod, make sure you purchase the correct replacement part for your water heater. Follow the manufacturer’s instructions for installation.

Check The Temperature and Pressure Relief Valve

The temperature and pressure relief valve, also known as the TPR valve, is an important part of your water heater.

To troubleshoot:

  • Turn off the power supply to the water heater and locate the temperature and pressure relief valve.
  • Place a bucket or container beneath the valve to catch any water that may be released.
  • Check the water for signs of rust, debris, or other contaminants.
  • Allow the valve to close and check that it does not continue to leak water.
  • Monitor the water heater for any further issues.

You can troubleshoot potential issues and ensure that the water heater is functioning safely and efficiently.

Water heaters can be fixed quickly and easily with basic troubleshooting techniques.

By following the tips outlined in this blog, you should be able to identify and fix the problem before calling in a professional water heater repair in Santa Ana CA, or any other region.

Don’t hesitate. Contact Cali’s Choice Plumbing & Restoration for 24 hours support. We uses latest equipment for repairing heaters.

Our team takes all COVID precautionary measures while working.